Product ID:MXB 7620/1597 EPOXY/GLASS PREPREG, #476
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005388
MSDS Number: BBSKF

FIBERITE CORP/ORANGE, CA 92666

Emergency Phone: (714) 639-2050

Cage: FO064

FIBERITE CORP/ORANGE, CA 92666

ORANGE, CA 92666

Telephone: (714) 639-2050

Cage: FO064

GLASS, FIBROUS

RTECS: LK3651000

Fraction By Weight: 70%

OSHA PEL 15 MG/M3 (DUST)

ACGIH TLV: 10 MG/M3 (DUST);9192

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <1%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

EPOXY/NOVOLAC RESIN (30-40%)

Fraction By Weight: 40%

Effects of Overexposure:EPOXY/NOVOLAC RESINS CAUSE SKIN & EYES
IRRITATION, POSSIBLE DERMATITIS OR SENSITIZATION.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES, CONSULT A PHYSICIAN.
SKIN: WASH WITH SOAP & WATER. COOL WATER RINSING HELPS REMOVE
FIBERS. INHALATION: MOVE TO FRESH AIR. INGESTION: UNLIKELY TO BE A
PROBLEM.

Flash Point:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SCBA. EXOTHERMIC POLYMERIZATION MAY OCCUR.
Unusual Fire/Explosion Hazard:DISSIPATE HEAT BY SPREADING MATERIAL
APART & DOUSING W/WATER. CONTAIN EMISSIONS USING LOCAL EXHAUST.

Spill Release Procedures:PICK UP & USE UNCONTAMINATED MATERIAL.
CONTAMINATED MATERIAL SHOULD BE PICKED UP & DPOSED OF PROPERLY.

Handling and Storage Precautions:STORE AT OR <40F. HAZARDOUS MATERIALS
MAY BE RELEASED AS DUSTS WHEN MACHINING CURED PRODUCTS.
Other Precautions:IN ACCORDANCE WITH GOOD INDUSTRIAL PRACTICE, HANDLE
WITH CARE AND AVOID UNNECESSARY PERSONAL CONTACT.

Respiratory Protection:NOT REQUIRED
Ventilation:GOOD GENERAL VENTILATION
Protective Gloves:BUTYL RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING.
Supplemental Safety and Health
MSDS DATE: 3/24/86.

Boiling Pt:B.P. Text:NONE
Spec Gravity:2.2
Evaporation Rate & Reference:NONE
Appearance and Odor:IMPREGNATED FABRIC/NO ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS, STRONG BASES.
Hazardous Decomposition Products:COX, NOX, AMINES, PHENOLS, BF3, GLASS
FIBERS.
Conditions to Avoid Polymerization:WHEN HEATED TO DECOMPOSITION TOXIC
EMISSIONS ARE RELEASED.

Waste Disposal Methods:THIS MATERIAL, IF DISCHARDED, MAY BE CONSIDERED
A HAZARDOUS WASTE AS DEFINED IN 40 CFR 261 BECAUSE OF ITS
REACTIVITY, HOWEVER IT MAY BE DISPOSED OF AS AN INERT SOLID IF THE
RESIN IS FIRST ALLOWED TO C URED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.